Commercial Stair Nosing 70mm x 40mm With PVC Insert step edge protection Tredsafe

Item in Stock | Usually dispatched within 24 hours


£92.20£299.99

SKU: D133R Category:

Non Slip Tredsafe Stair Nosing 70 x 40 mm

In addition to the function of step edge protection the Aluminator® range offers an easy, energy efficient solution to illuminate steps. Should a local or emergency power failure occur on stairways, increasing the risk of hazard for evacuees, the Aluminator® system allows the evacuee to orientate, locate stair edges and risers, and to assist in the safe evacuation of the premises. The system requires no electrical connection, is simple to install and requires no special maintenance other than that which you would normally carry out on any similar product. Only normal illumination, daylight, fluorescent or standard tungsten filaments are required to activate its performance.

Installation

  1. Ensure the steps are dry, clean, free of debris, level and even.
  2. If pre-drilled use the drill holes to mark steps for drilling location.
  3. Drill and Plug the steps.
  4. Apply suitable adhesive to the underside of the nosing and apply nosing to the step.
  5. Screw down the step with the appropriate size screws.
  6. Apply insert (if separate) or insert pip to cover the screw head.
Select Size

Black Tredsafe – 1m L, Black Tredsafe – 1.5m L, Black Tredsafe – 2m L, Black Tredsafe – 2.46m L, Black Tredsafe – 2.7m L, Black Tredsafe – 3.22m L, Dolphin Grey Tredsafe – 1m L, Dolphin Grey Tredsafe – 1.5m L, Dolphin Grey Tredsafe – 2m L, Dolphin Grey Tredsafe – 2.46m L, Dolphin Grey Tredsafe – 2.77m L, Dolphin Grey Tredsafe – 3.22m L, White Tredsafe – 1m L, White Tredsafe – 1.5m L, White Tredsafe – 2m L, White Tredsafe – 2.46m L, White Tredsafe – 2.77m L, White Tredsafe – 3.22m L, Yellow Tredsafe – 1m L, Yellow Tredsafe – 1.5m L, Yellow Tredsafe – 2m L, Yellow Tredsafe – 2.46m L, Yellow Tredsafe – 2.77m L, Yellow Tredsafe – 3.22m L