Tile-In Bullnose 10 and 12mm Matt Silver

Item in Stock | Usually dispatched within 24 hours


SKU: DL5XE Category:

Tile-In Bullnose 10 and 12mm Matt Silver

  • Genesis NAT is an attractive slender profile designed to enhance the step installation and protect the edge of the floor covering from impact damage.
  • It also provides a little grip on the edge of the step to prevent slipping.
  • The flange sits underneath flat tile and also forms a locking locator for the riser tile.
  • The neat rounded face highlights the edge of the step as well as protecting it.


  • Matt Silver


  • 2.6m


  • 10mm
  • 12mm


  1. Ensure the steps are dry, clean, free of debris, level and even.
  2. If pre-drilled use the drill holes to mark steps for drilling location.
  3. Drill and Plug the steps.
  4. Apply suitable adhesive to the underside of the nosing and apply nosing to the step.
  5. Screw down the step with the appropriate size screws.
  6. Apply insert (if separate) or insert pip to cover the screw head.
Select Size

Matt Silver – 10mm, Matt Silver – 12mm